For aquariums of 1000 LTR. - 3,000 liters.

^® Supermarin 250 basic data Red Dragon ^® 3 Mini Speedy Pump 50 Watts 1500 L / H Advable
with 10V control input , Adjustable speed: 300-3000 1 / min Base plate: Ø 27 cm / height ~ 58 cm

Technical data Bubble King ^® Supermarin 250 Internal 250: pump
:
Adjustable Bubble King ^® Red Dragon ^® 3 Mini Speedy Pump 50 Watts 1500 L / H
Max. ~ 1500 l / h of air intake and max. ~ 4,000 l / h of
electric consumption at the water input - effective power: p = min. 15 watts / h - max. 50 watts / h
operating voltage: 230 volts 50 Hz (also available in 110V / 60Hz)
Protective index: IP 68

Water level: ~ 180 mm to ~ 230 mm
Skimmer weight: 11 kg Pump included

Skimmer dimensions without pump:
330 mm wide / 290 mm long / ~ 580 mm height
skimmer dimensions with pump (90 ° at the setting tube):
360 mm wide / 440 mm long / ~ 580 mm high
dimensions of the skimmer with pump (opposite corner tube):
500 mm wide / 300 mm long / ~ 580 mm high

DataSheet_and_SPARE_PARTS.PDF    OPERATING_And_MAINTENANCE_instructions.pdf
RD3_DATASHEET_and_SPARE  
PARTS.PDF RD3_BIDIEUNGS_UND_WARTUngsanleitung.pdf

////////////////////////////////////////////////////// ////////////////////////////////////////////////////// //////////////////////////////////
the connection to an Aquarium controller is ready for this pump!
Prepared for connection to an aquarium computer (for example GHL) via a 0-10V interface.
The  additional controller which allows the connection to the computer costs € 159 (including all connection cables and power supply)

The following computers have been tested so far:
GHL profiles 3.1 and the Aqua Controller of Neptune Systems.

Compatible with the following brands:

////////////////////////////////////////////////////// ////////////////////////////
Fonctionnalité du montage électronique:
Dès qu'une tension> 0,5V est appliquée à l'interface 10V, l'adaptateur d'interface prend le relais Control regulation and lock the controller buttons. If the voltage is <0.5 V, the normal operation of the controller is again activated using the buttons. The interface adapter can thus remain connected without performing a function.

If you specify a voltage less than 0.5 V on the aquarium computer, the 0-10 V interface is disabled and the operation is carried out manually. From 0.5V, the interface takes control of the regulation. In 0.5 V-0.8 V beach, the pump is disabled. From 1 V, the pump begins to operate at the lowest level (15 W). With an increase of 0.5 V, the level is increased. So 1v = 15W 2.5V = 25W… .. 5.0v = 50W.

If the input voltage is higher, the drive remains in a maximum position and no longer increases. The interface adapter behaves as if the corresponding key was pressed.
////////////////////////////////////////////////////// ////////////////////////////////////////////////////// ////////////////